Tips for buying hotel furniture

University Inn Valparaiso In

Moisture content
The moisture content of hotel furniture should not exceed 12%. If the moisture content is high, the wood is easy to warp and deform. Generally, consumers who do not have test equipment when buying, can use the method of hand touch, touch the bottom of the hotel furniture or the unpainted place inside, if it feels damp, then the moisture content is at least 50%, which is not usable at all. One way to suggest you is to sprinkle a little water on the unpainted part of the wood. If the bleeding is slow or not, it means that the moisture content is high.

Folding furniture structure
Small pieces of hotel furniture, such as chairs, stools, hangers, etc. can be dragged on the concrete floor when selecting, and the sound is clear and crisp, indicating that the quality is better; if the sound is dumb, there is a murmur, It shows that the mortise joint is not tight and the structure is not strong. Writing desks and tables can be shaken by hand to see if they are stable. You can sit on the sofa for a while. If you sit on it, it will creak and sway. It will be nail work and it will not take long.

There should be four triangular clips on the legs of the square table, the bar table, the chair, etc., which can be used for fixing. When choosing the table and chair, you can turn the table and chair upside down and have a look. The cloth-covered chair can be touched with your hand.

Fold the four corners flat
This will be known when you put it on the flat ground, and some hotel furniture has only three legs on the floor. Check to see if the table top is straight, not bowed or collapsed. The table top is raised, and the glass plate rotates when it is placed; the table top is recessed, and the glass plate is broken when it is placed on it. Pay attention to check the cabinet door, the drawer should not be too large, and the horizontal and straight should be paid attention to, and the door should not sag.

Folding veneer patchwork
Whether it is pasting wood veneer, PVC or pasting pre-painted paper, pay attention to whether the leather is smoothly pasted, whether there are bulges, blisters, and loose seams.

When checking, look at the light, you can’t see it if you don’t. Fraxinus mandshurica veneer hotel furniture is relatively damaged, and generally only lasts two years. As far as wood veneers are concerned, planed veneers are better than peel-cut veneers. The method to identify the two is to look at the wood pattern. The sliced ​​veneer has a straight and dense texture, and the peeled veneer has a curved and sparse pattern. The particleboard veneer hotel furniture must be edge-sealed on the ground part. If the edge-board is not sealed, it will absorb moisture, swell and be damaged. Generally, the corners of veneer hotel furniture are easy to lift up. You can buckle the corners with your hands when selecting. If you click it, it means there is a problem with the glue.

Stephen Lin

Stephen Lin

Hi, I'm Stephen from HuangBin Hotel Supplies CO., Ltd in China, your potential supplier of Hotel products. I've focused on them for 8 years. I would like to share the article with you about the knowledge related to hotel products and our cases.
Stephen Lin

Stephen Lin

Hi, I'm Stephen from HuangBin Hotel Supplies CO., Ltd in China, your potential supplier of Hotel products. I've focused on them for 8 years. I would like to share the article with you about the knowledge related to hotel products and our cases.
分享 facebook
Facebook
分享 twitter
Twitter
分享 linkedin
LinkedIn
分享 whatsapp
WhatsApp

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注

5 × 5 =

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@onehotelsupplies.com”